To reset counter Canon PIXMA iX4000 or iX5000 you printer must enter into service mode. Procedure to enter to service mode on Canon PIXMA iX4000 or iX5000 is as following :
- Connect the Canon PIXMA iX5000 or iX4000 printer to the power cord. ( note : If the automatic power-on function is enabled in the printer, the printer enters the service mode for the first time, but it will never enter the service mode if the printer is turned off by the Power button. This is because the printer remains to be turned on internally if the power is turned off by the Power button. To prevent this, disconnection of the power cord is required before starting the printer in the service mode ) .
- With the Canon PIXMA iX5000 or iX4000 printer powered off, while pressing the Resume/Cancel button, press and hold the Power button. (note : Don’t release the buttons. The Power LED lights in green to indicate that a function is selectable.)
- While holding the Power button, release Resume/Cancel button. (Don’t release the Power button.)
- While holding the Power button, press Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons.
- When the Power LED lights in green, press the Resume/Cancel button 4 times to reset waste ink counter in the Canon Pixma iX5000 / iX4000. (note : If the Power LED does not light in green the printer does not enter the service mode, disconnect the power cord and plug it again. Then start from step 1 to start the printer in the service mode again).
- At the end of the service mode, press the Power button.
Other specified number of time(s) according to the function listed in the table below.
Time(s) LED indication Function Remarks
0 times Green (Power) Power off
1 time Orange (Alarm) Service test print
2 times Green (Power) EEPROM information print
3 times Orange (Alarm) EEPROM initialization
4 times Green (Power) Waste ink counter resetting
5 times Orange (Alarm) Destination settings
6 times Green (Power) Print head deep cleaning (Cleaning of both black and color)
untuk mereset Canon Printer iX4000 atau iX5000 printer rekan - rekan harus masuk ke service mode. berikut ini procedure untuk masuk ke printer service mode :
- Colokan kabel powernya iX4000 atau iX5000 ke stopkontak(atau sumber listrik).(catatan : jika printer automatic power on enable, printer akan masuk service mode untuk pertama kali, tetapi tidak akan pernah masuk ke service mode jika printer dimatikan dengan menekan tombol power dikarenakan printer masih menyala(internal) jika printer dimatikan dengan menekan tombol power. Untuk menghindari ini cabut/lepas kabel power dari stopkontak(sumber listrik) lalu colokan/pasang kembali kabel power ke stopkontak(sumber listrik) untuk masuk ke service mode).
- Dengan printer iX4000 atau iX5000 dalam keadaan mati, ketika menekan tombol Resume/Cancel, tekan dan tahan tombol power(jangan lepaskan kedua tombol sampai power LED hijau)
- Lepaskan tombol Resume/cancel, tombol power masih ditekan.
- Tombol power masih ditekan, tekan tombol Resume/Cancel 2 kali dan lepaskan kedua tombol(tombol power dan Resume/cancel).
- Ketika power LED menyala hijau, tekan tombol Resume/cancel 4 kali untuk mereset waste ink counter Printer pixma iX4000 / iX5000(jika power LED tidak menyala hijau printer tidak masuk ke service mode, lepaskan kabel power lalu pasang kembali dan ulangi langkah dari langkah 1 sampai printer masuk ke service mode)
- Terakhir tekan tombol power, tunggu sampai printer diam
Silahkan meninggalkan komentar berupa pertanyaan atau hal sejenisnya,
ingat jika admin mengira itu adalah junk comment maka akan dihapus.
Conversion Conversion Emoticon Emoticon