Canon MP145, use scanner only

hello gan !
i got a solution how to SCAN if your printer have E-5 error or something. First u must remove the both cartridge from your printer and make sure u connect your printer to your computer, after that, do this

• With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
• When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.

And then you will see no error in your printer (the LED shows number 1,and the alarm is in green)
THATS ALL, so simple
NOW U CAN SCAN USING MP NAVIGATOR!

Canon MP145 error code e-5

ok gan, today i'll share how to fix canon MP145 code error E5
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly

with the printer powered off but connected to power source, you must

press and hold the on/off button while holding the stop/reset button (hold down the on/off button until the power light lit green)

when the power lit press the stop/reset button 2 times and then release the on/off button

this will bring your MP145 to the SERVICE MODE (number "0" in the 7 display and power light is green)

press stop/reset button 4 times with :

• the 1 time = alarm led, light
• the 2 times = on/off button led, light
• the 3 times = alarm led, light
• the 4 times = on/off button led, light
  • ---> the number of the reset button pressing
  • --> 0 time green power off
  • --> 1 time orange service pattern print
  • --> 2 times green EEPROM print
  • --> 3 times orange EEPROM reset
  • --> 4 times green waste ink counter reset
  • --> 5 unplug cable power. (for MP145 / MP150)
  • --> 6 turn off power. (for MP160)

then press the on/off button 2 times(the 2 press will turn off your printer)

then turn on the printer and you'll see number 1 in 7 display and the alarm light not blinking

use with your own risk.
i used this trik and fix this problem
if that step not fix your problem then buy a new catridge :D

Code error Canon MP145, MP150, MP160

ok untuk postingan pertama aku share code eror untuk canon MP145, MP150, MP160

Code Error canon MP145, MP150, MP160 :

E2-2 = tidak ada kertas atau priter tidak bisa narik kertas (bisa karena roll kotor)
E3-3 = Paper jam
E4 = tidak ada tinta/cartridge
E5-5 = ink cartridges tidak terpasang atau cartirdge yang terpasang salah (tidak compatibel)
E8 = absorber full, atau platen waste ink absorber full mita direset
E9 = hubungan ke digital camera / video camera tidak support
E14 = Ink cartridges whose destination are wrong
E15 = Catridge warna mengalami run out
E16 - Catridge hitam mengalami run out
E17 -E19 = masalah pada scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error (bagian cleaning head)
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = ink absorber full or platen waste ink absorber full > reset dengan toolsnya
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = motor driver tidak normal
E40 20 = hardware lain error
E42 22 = Scanner error